Deutz engine lubricating oil is classified according to quality levels, such as SG, SH, etc. The specific situation of gasoline engines has 8 levels, gradually from SA to SH. Recently, SG and SH are commonly used, both of which are of high quality to complement the performance of automotive engines. If engine lubricating oil with lower levels than the specified level is continuously used, it will have a negative impact on the car engine. Not being stingy with engine lubricating oil is the key to maintaining and servicing the car engine.
Little do we know, everyone knows that insufficient remaining oil during the maintenance of a Deutz engine can cause equipment failures such as engine burnout, but many people cannot understand the hazards of excessive introduction. Introducing engine lubricating oil too much can also cause many problems. Engine lubricating oil is sucked into the gate valve by the respiratory system software, which can dirty the valve and cause the car to stall, without any benefits. Therefore, attention should be paid to strictly controlling the amount of engine lubricating oil introduced.
After the lubricating oil of the Deutz engine decreases, it must be filled. What happens when different levels of engine lubricating oil are mixed? In theory, there is no significant harm, only the level of engine lubricating oil itself will approach the lower quality level after mixing. Adding intentionally purchased expensive engine lubricating oil and then adding cost-effective engine lubricating oil, the more expensive engine lubricating oil loses its practical significance. Therefore, the engine lubricating oil used for filling should be of the same grade as the engine lubricating oil commonly used.